DeepCool EK720-XL-1.0 High Performance Thermal Pad

Product Description

DeepCool EK720-XL-1.0 High Performance Thermal Pad

Is trapped heat hurting component cooling? The DeepCool EK720-XL-1.0 High Performance Thermal Pad replaces worn interfaces with reliable heat transfer. It conducts heat from microchips toward a connected heat sink, helping compatible electronics maintain better chip-to-cooler contact.

How Does the DeepCool EK720-XL-1.0 Improve Thermal Contact?

Chip surfaces and heat sinks may contain tiny gaps that trap air. Since air transfers heat poorly, those spaces can weaken contact and reduce cooling effectiveness.

The EK720-XL-1.0 uses a pliable structure that conforms between surfaces. It fills small pockets between chip components and heat sinks, replacing aged or low-quality thermal material.

DeepCool rates its thermal conductivity at 6.0 W/m·K. The stated thermal impedance is 0.8 cm²/W, giving buyers defined values for comparing thermal pads.

DeepCool EK720-XL-1.0 Specifications and Performance

The EK720-XL-1.0 is built for direct contact between heat-producing chips and cooling surfaces. Its flexible material supports careful placement across compatible electronics.

• Model: EK720-XL-1.0
• "isSelectedEnd">Thickness selection is critical. A pad that is too thin may not contact both surfaces, while excessive thickness can affect heat-sink seating. Confirm the required 1.0 mm size before installation.
• 
  

Key Features and Practical Benefits

6.0 W/m·K Conductivity

• The rated conductivity supports heat movement from microchips into a connected heat sink. It targets electronics where old material no longer provides proper contact.

Flexible Gap-Filling Material

• The pliable pad adapts to minor surface differences. It reduces air pockets between cooling surfaces without requiring liquid thermal grease.

Large Cuttable Sheet

• The 120 × 120 mm format gives repair technicians and PC enthusiasts room to cut pieces for compatible chip layouts.

Standardized Test Rating

• DeepCool states that the 6.0 W/m·K value comes from standardized testing, giving buyers a defined performance figure.

Does the EK720-XL-1.0 Require Power?

• No electrical connection is required. The pad works passively between a heat source and a heat sink.
• It consumes no system power, needs no software, and uses no controller. Results depend on accurate sizing, clean surfaces, correct thickness, and proper mounting pressure.

Which Devices Can Use This DeepCool Thermal Pad?

• DeepCool lists laptops, graphics cards, game consoles, and other electronics as possible applications. These products often use pads on memory chips, power components, controllers, or similar heat-producing parts.
• Laptop users may consider it for compatible cooling layouts after verifying the original thickness. Graphics card owners can use it on supported chip-to-heatsink contact points during servicing.
• Game console owners, electronics technicians, and tech hobbyists may also use the pad where a 1.0 mm interface is required. Compatibility depends on the original cooling design and component clearance.
• Within the Computer Accessories category, this product best suits experienced users who can measure and cut thermal material correctly. Incorrect thickness or placement may prevent proper contact.

Reliability, Installation Care, and Warranty

• The EK720-XL-1.0 provides stated conductivity, thermal impedance, dimensions, and thickness. These values help users choose material based on measurable requirements.
• Measure the existing pad before removal and match its footprint carefully. Keep protective films attached until placement, then avoid touching exposed contact surfaces.
• This DeepCool model comes with no warranty. Confirm the 1.0 mm requirement and available sheet area before cutting.

Buy DeepCool EK720-XL-1.0 in Bangladesh

• Aging thermal pads can weaken heat transfer even when the heat sink still works. Replacing the interface with the correct thickness can restore better physical contact.
• Buyers checking the DeepCool EK720-XL-1.0 price in Bangladesh can review current pricing and stock through PCB Store. Check whether it is available at PCB Store Dhaka before ordering.
• PCB Store provides reliable after-sales service and technical product support across Bangladesh. This thermal pad has no warranty, so buyers should verify compatibility before purchase.
• Choose the EK720-XL-1.0 after confirming the device needs a 1.0 mm pad. Its 120 × 120 mm sheet suits supported laptops, graphics cards, consoles, and electronics.