Product Description

TG Putty Basic: Fill Suitable Thermal Gaps Without Pre-Cut Pads

Introduction

Thermal Grizzly TG Putty Basic 30g is a moldable thermal interface material for suitable gaps between electronic components and their cooler. Its price in Bangladesh is BDT 2,500 at PCB Store. Choose it when a repair or cooling modification calls for thermal putty rather than a fixed-thickness thermal pad.

Product Overview

The Basic version offers medium thermal conductivity within the TG Putty range. It is electrically non-conductive and designed as an alternative to conventional thermal pads, particularly around suitable GPU components. It is supplied as putty in a 30g container, not as a sheet of pre-cut pads.

Before opening a graphics card or other device, check the original cooling design and warranty conditions. Identify which components use gap-filling material and which use a thin thermal interface on the main die. A correct installation depends on the intended contact areas and the way the cooler sits on the board.

Key Features & Benefits

Flexible Gap Filling

The material can fill suitable gaps from 0.2mm to 3.0mm. Its moldable form helps accommodate differing component heights without requiring several separate pad thicknesses. Apply only where the cooling design permits, and check that the cooler can return to its correct mounting position.

Electrically Non-Conductive Formula

The non-conductive formula is relevant around memory and power-delivery components on a PCB. It does not make careless handling harmless: disconnect power, protect the board from physical damage and avoid spreading material onto connectors. Keep the working area clean so dust is not mixed into the application.

Application Tools Included

Three spatulas are included for working with the putty. Prepare the contact surfaces carefully before applying a fresh amount. Work methodically across the intended components rather than covering the whole board, and keep track of screws and mounting parts during disassembly.

Performance / Technical Highlights

TG Putty Basic has an operating temperature range of -40°C to +120°C. This range describes the interface material, not a recommended operating temperature for the hardware. The quality of contact, mounting pressure and cooling system condition still matter. Do not substitute this gap filler for conventional CPU or GPU die thermal paste.

Who Is It For?

This 30g product suits experienced PC builders, technicians and users carrying out a planned thermal-pad replacement or compatible GPU cooling modification. If the original material type or required contact gap is uncertain, have a technician inspect the cooling assembly before proceeding.

Warranty & Reliability

No warranty is included with this consumable. Retain the invoice and follow the application guidance. Modifying another device can affect that device’s warranty, so check its terms before removing the cooler.

Maintenance / Pro Tips

Keep the container closed between applications and use clean tools. After reassembly, check that all cooling connections are restored and monitor normal hardware operation.

Conclusion

Buy Thermal Grizzly TG Putty Basic 30g from PCB Store for BDT 2,500. Match this flexible, electrically non-conductive material to a suitable gap-filling task for a carefully planned hardware service in Bangladesh.