Out Of Stock
Share:
Noise ruining your recordings? SESCOM Canare Star-Quad Cable Black & Gold XLR Mic Cable 25 Foot - Black fixes hum fast.
Signal noise kills takes. Handling noise wastes sessions. Cheap mic cables leak interference. This cable targets those pain points with proven Star-Quad geometry, dense shielding, and pro-grade connectors. It serves studios, live stages, and installed audio where reliability matters.
Built by Sescom using Canare’s premier L-4E6S Star-Quad microphone cable, this 25-foot XLR run prioritizes low noise and flexible handling. The result feels quiet under pressure, bends easily, and holds up to daily routing.
Clean signal transfer depends on geometry, shielding, and termination quality. This cable combines all three. The four-conductor Star-Quad layout cancels electromagnetic interference far better than standard two-conductor designs. Dense shielding blocks external noise. Quality connectors maintain consistent contact.
Short runs benefit. Long runs benefit more. The 25-foot length balances reach with control, making it ideal for mic stands, racks, and floor paths without excess slack.
What you hear: lower hum, reduced buzz, and less handling thump during movement.
Star-Quad geometry uses four conductors arranged to cancel induced noise. This configuration cuts hum and interference to under ten percent of conventional two-conductor mic cables. High shield density adds another barrier against RF and EMI.
Handling noise drops due to the cable’s construction and flexibility. Movements translate less into the signal path. That matters for live vocals and boom work.
Connectors from Neutrik, Connectronics, and Switchcraft provide solid mating cycles and stable pin contact. Terminations stay tight over time.
This cable targets microphones first. It also performs well with line-level signals. Use it from mixers to power amplifiers where noise rejection still matters.
Expect quieter backgrounds during recording. Expect fewer ground issues on stage. Expect stable performance across powered speakers listed as compatible devices.
Sescom assembles these cables using Canare’s flagship L-4E6S. The jacket remains flexible without kinks. Braided shielding protects while allowing easy routing.
Gold and black XLR ends add corrosion resistance and visibility in racks. The build favors daily use, coiling, and transport.
This XLR cable connects microphones to interfaces, mixers, and stage boxes. It pairs with speakers for line-level runs. It suits studios, broadcast rooms, rehearsal spaces, houses of worship, and live venues.
In the Computer Accessories category, this Cable sub-category option fits users who prioritize signal integrity over flashy extras. It integrates naturally into existing XLR ecosystems.
Handling noise distracts performers and engineers. Star-Quad construction and jacket choice reduce that risk. The cable stays supple under foot traffic and stand adjustments.
Flexibility speeds setup. Tear-down becomes quicker. Coils lay flat without memory.
Professional sessions demand repeatable results. The component choices here reflect that goal. Quality connectors maintain contact. Dense shielding resists interference in crowded RF environments.
Sescom’s build approach emphasizes consistency across batches. That matters for multi-mic rigs.
Standard two-conductor XLR cables invite hum in noisy spaces. Star-Quad geometry actively cancels interference. The difference shows during long runs and high-gain vocal chains.
If your room has lighting dimmers, wireless systems, or power cables nearby, this design pays off.
Audio professionals in Bangladesh can source this cable through PCB Store. Local availability reduces downtime and shipping risk. Stock access supports urgent replacements before sessions or events.
Stop chasing noise after the take. Choose a cable designed to prevent it. The SESCOM Canare Star-Quad Cable Black & Gold XLR Mic Cable 25 Foot - Black delivers lower hum, reduced handling noise, and dependable flexibility. Secure your setup now through PCB Store in Bangladesh and lock in clean signal paths.
Inside Dhaka: ৳80
Outside Dhaka: ৳130
Yes. It uses standard XLR male-to-female connectors. It pairs with dynamic and condenser microphones that accept XLR inputs, as well as mixers and interfaces using XLR ports.
Yes. The cable supports microphones and line-level signals. Its shielding and geometry suit mixer-to-power-amp runs where noise rejection still matters.
Star-Quad uses four conductors arranged to cancel induced interference. This design lowers hum and EMI to under ten percent of typical two-conductor microphone cables.
Handling noise stays low. The construction and flexible jacket reduce thumps from movement, making it suitable for live vocals, boom mics, and stage adjustments.
Sescom builds the cable using high-quality connectors from Neutrik, Connectronics, and Switchcraft for stable contact and long service life.
No. The Star-Quad design and dense shielding maintain clean signal over 25 feet, especially in environments with electrical interference.
The Star-Quad version offers much lower noise rejection than standard two-conductor Canare XLR cables, especially on long runs or high-gain microphone setups.
Yes. The jacket remains supple. It coils easily without memory, speeding setup and teardown during sessions and events.
Pricing and stock vary. PCB Store in Bangladesh carries this model. Check current availability directly at PCB Store for the latest price and local warranty details.